A screen repair with a little more peace of mind. Meet Covered.
Book my repair
PS1 & PS2 Repair in Charlotte

PlayStation 2 Repair & Restoration in Charlotte

The best-selling console of all time still runs when the laser reads and power holds. Disc Read Errors, dead power, worn controller ports and noisy fans are fixable on fat and slim PS2, with an honest answer when a unit is beyond saving.

$89.99by model
2–5 daysturnaround
90 dayswarranty

Not in the Charlotte area? Mail it in from anywhere in the U.S.

The short answer

We repair the PS1, PSone and fat and slim PS2 at our Charlotte bench: disc read errors, dead power, worn ports, noisy fans and HDMI mods. A free diagnostic and a quote come first. Most PlayStation 1 and 2 repairs take 2 to 5 days. Your model's exact price is listed on this page. The work carries a 90-day warranty, and unfixable means unbilled.

Signs you need this repair

Disc Read Error

The PS2 shows the error or drops back to the browser screen. The laser, the drive mechanism or the disc itself is the problem.

Reads CDs but not DVDs

Black PS1 discs and blue-bottom PS2 games load, but silver DVD games don't. The PS2 laser reads CDs and DVDs with separate diodes, and the DVD side often fades first.

PS1 skips or only works flipped over

Freezing in cutscenes, or playing only when stood on its side. The laser sled is worn or the laser is weak, and flipping it hides a mechanical problem.

Slim lid won't open or close

The open button won't release the lid, or the console acts like it's open. The latch, spring or lid sensor.

No power

No light, or a light that goes out right away. Blown fuses, a failed power supply or corrosion.

Controller or memory card not detected

Bent port pins or cracked solder joints on the port board.

Loud fan or overheating

Dust packed into the fan and heatsink.

What usually causes it

Laser wear

Laser output drops with age, and reading DVDs asks more of it than CDs do.

Worn drive mechanics

Gears, sled rails and the spindle wear, and the factory grease hardens.

Power surges and spills

Fuses blow and corrosion forms on the power circuit.

Port wear

Years of plugging in controllers and memory cards bend and loosen pins.

How we fix it

  1. 1
    Diagnostic and laser test

    We open the console, inspect the board, and test the laser with known-good CD and DVD games. You get a quote before any work starts.

  2. 2
    Laser and drive repair

    We clean the lens, service the sled rails and gears, and adjust or replace the laser depending on its condition. Hardened grease gets cleaned off and replaced.

  3. 3
    Lid and tray

    Slim lids get a new spring or latch, and the lid sensor gets checked. Fat PS2 tray mechanisms get cleaned and the tray gears inspected.

  4. 4
    Power, ports and board

    We trace power faults to blown fuses, a failed supply or corroded parts, then repair them. Bent controller and memory card pins get straightened, or the port gets replaced.

  5. 5
    Cleaning and cosmetics

    Fans and heatsinks get cleaned. Shell restoration or Retrobright is available if you want the plastic brought back.

  6. 6
    Full disc compatibility test

    We play PS1 CDs, PS2 blue-bottom CDs and PS2 DVDs, including a dual-layer title, so we know the laser handles all of them before return.

Laser, storage and video options

What we recommend depends on how worn the laser is and which model you have. Check the SCPH number on the bottom label.

Laser adjustment

Some PlayStation lasers have an adjustment pot. A small tweak can help a laser that's only slightly weak.

Replacement laser

The usual fix for a PS2 that can't read DVDs or a PS1 that skips constantly.

HDMI output

Plug-in adapters are the simple route, and internal options exist for some models. We explain which fits your console and TV.

Hard drive (fat PS2 only)

The fat PS2 takes a network adapter and hard drive in its expansion bay. Slim models don't have the bay.

PS1 and PS2 mods

Ask us about upgrades for your PS1 or PS2 as well as repairs, such as video output upgrades for modern TVs, new shells and controller refurbishing. Tell us the model and what you have in mind, and we will tell you what fits before any work starts.

How long it takes

Most PS1 and PS2 repairs take 2 to 5 days. Lens cleaning and lid fixes finish early. Laser replacement, board-level power repair or a shell restoration pushes toward the longer end, and so does waiting on the right laser for your model. You'll hear our estimate when we quote.

PS1 & PS2 Repair prices by model

Live prices from our shop price sheet. Parts and labor included, with a 90-day warranty.

ModelOverheating
PlayStation 2$89.99

Models we repair

PS1 (all revisions)PSonePS2 Fat (SCPH-30000/50000)PS2 Slim (SCPH-70000/90000)
4.9★ on Google

What customers say

All 1,781 on Google
EXCELLENT WORK!!!!!!!!! Prices Are Beyond Fair , Customer Service Was Wonderful & Helpful! Recommend Anyone Who Needs Games Or Phones Repaired. Awesome Stickers Too That They Provide. 10/10 ExperienceDeasaan Sargent · Game repair · Google review
… Definitely A five star rank for me with the experience I had I bring all of my electronics here PlayStation iPad iPhone, android PS5 Xbox I mean whatever it is if it’s electronic, I’m pretty sure they can fix itCoel Young · Game repair · Google review
Great service! They had it done in a timely manner! 100 percent fixed. Would definitely recommend this shop for all your PC, Phones, and gaming consoles! I’ll be going back if anything else needs repair.TRu Kazekage · Game repair · Google review

Real customer reviews from Google and Yelp, quoted word for word. … marks where a longer review was shortened.

covered. everything

Protect your PlayStation and everything else at home

Covered Everything protects your phone plus up to 25 more devices, like consoles, laptops and tablets, for $19.99 a month. Set it up when you collect your repair.

How Covered works
1
Every repair

90-day warranty

On parts and workmanship.

2
This PlayStation and your household

Covered Everything

$99 per claim on this PlayStation, $50 on your phone. Cancel anytime.

When something breaks

Fixed here, on our bench

Bring it in and we handle the claim with you.

Before you bring it in

  • Find the model number on the bottom label, like SCPH-50001 or SCPH-90001.
  • Bring a game that fails and one that works, ideally one CD and one DVD title.
  • Leave memory cards at home unless a card slot is part of the problem. Saves live on the card.
  • Bring the power cord or power brick. The SCPH-70000 slim uses an external brick.
  • Mailing it in? Remove any disc and pad every side.

Repair or replace?

Repair makes sense for most PS1 and PS2 faults. Lasers, lids, ports and fans are fixable, and a used replacement has the same aging laser inside. A fat PS2 is worth extra effort if you want its expansion bay. Severe board corrosion or a surge-damaged chip is where repair may not pay off, and we give you an honest answer at the free diagnostic.

Thinking of fixing it yourself?

Cleaning the lens with isopropyl alcohol is safe and worth trying. Turning the laser pot is riskier: a small change can help, but pushing it too far burns the laser out faster. Swapping a laser is doable with the right part, but PS2 models use several different lasers and they aren't all interchangeable. Fat PS2s use fine ribbon cables that tear if you rush. If you've adjusted the pot and it got worse, or a ribbon tore, bring it in.

DIY repair gone wrong? See DIY repair rescue →

After your repair

  • Run it flat, or upright only with a proper stand, on a hard surface.
  • Keep discs clean and stored in their cases.
  • Clear the vents every few months.
  • On a slim, close the lid gently and don't force the latch.

Questions people ask

Do you do mods and upgrades as well as repairs?

Yes. Ask us about upgrades for your PS1 or PS2 as well as repairs, such as video output upgrades for modern TVs, new shells and controller refurbishing. Tell us the model and what you have in mind, and we will tell you what fits before any work starts.

What causes the PS2 Disc Read Error?

Most often a weak or dirty laser. Worn sled gears, a tired spindle motor or a scratched disc cause it too. We test with known-good discs to find which.

Is it worth repairing a PS2?

Usually yes. Most faults are laser, power or port problems with reasonable fixes, and a used unit has the same aging parts. If yours isn't worth it, we'll say so.

My PS2 Slim lid won't open or close. Can you fix it?

Yes. The latch, spring or lid sensor usually needs replacing. We test the sensor so the console knows when the lid is shut.

Can you add HDMI output to a PS2?

Yes. Depending on the model, that's a plug-in adapter or an internal option. We explain which fits your setup.

Do you repair both the fat and slim PS2?

Yes, both, plus the original PS1 and the PSone.

Why does my PS2 play CDs but not DVDs?

The laser uses separate diodes for CDs and DVDs, and the DVD side usually weakens first. A replacement laser fixes it.

Do you still fix the original PlayStation?

Yes, every revision and the PSone. The laser and sled wear the same way they always have, and we test with PS1 discs before return.

Can you fix my PS2 memory card slot?

Yes. Bent pins get straightened or the port gets replaced. Keep the memory card at home unless it's part of the problem.

Do you take PS2s by mail?

Yes. Send it from anywhere in the country. It gets the same free diagnostic and quote as a walk-in, and return shipping is free and insured.

Related repairs

Nationwide

Mail-in repair from anywhere in the U.S.

Free diagnostic when it arrives. Free insured shipping back.

  1. 1Tell us your model and the problem
  2. 2Ship it insured. We diagnose it within a day
  3. 3Approve the price. Fixed and back in 7–10 days

More consoles repairs

All

Areas we serve

All areas
Menu
Phone RepairComputer & Mac RepairiPad & Tablet RepairGame Console RepairDrone RepairData RecoveryiPod RepairCoveredMail-in repairSell your deviceVisit & contactTrack a repairBook my repairEspañol